Pensum for emnemodul VG prosessregulering (Advanced process control Master course) -- About the exam. The exam is written. ---- Pensum (syllabus): See slides for the most important parts of the course. --- Additional material for the course Part 1. Plantwide control Main reference: Chapter on "Economic plantwide control" from the book by Rangaiah and Kariwala (Editors) on Plantwide control. Recent Developments and Applications, Wiley, 2012. Note that I use the word "economic" to distiguish my procedure from other procedures, noteably the one by Luyben. Extra 1. S. Skogestad, ``Control structure design for complete chemical plants'', Computers and Chemical Engineering, 28 (1-2), 219-234 (2004). Extra 2. J.J. Downs and S. Skogestad, ``An industrial and academic perspective on plantwide control'', Annual Reviews in Control, 35, 99-110 (2011). 2. Kap. 10 (control structure design) i 2. utgave av "Multivariable feedback design" av Skogestad og Postlethwaite Except the following parts (which are only for the PhD students): 10.4.3 Pole vectors 10.4.4 Partial control 10.6.3 and rest of chapter (advanced Decentralized control) 3. Paper by Aske on consistent inventory control. Part 2. Tuning Main reference: Sigurd Skogestad and Chriss Grimholt, ''The SIMC Method for Smooth PID Controller Tuning'', Chapter 5 in: R. Vilanova, A. Visioli (eds.), PID Control in the Third Millennium, Advances in Industrial Control, DOI 10.1007/978-1-4471-2425-2_5, © Springer-Verlag London Limited 2012 Extra 1. "Simple analytic rules for model reduction and PID controller tuning". Sigurd Skogestad. Published in: J. Process Control, vol. 13 (2003), 291-309. Extra 2. "Tuning for Smooth PID Control with Acceptable Disturbance Rejection". Sigurd Skogestad. Ind. Eng. Chem. Res. 2006, 45, 7817-7822 Part 3. Multivariable control 1. RGA-part from Chapter 3 in "Multivariable feedback design" , Skogestad & Postlethwaite (Wiley, 2005) 2. Decentralized control part from Chapter 10 (10.6.1 and 10.6.2) 3. MPC: Chapter 20 from Seborg et al. (2011).