Image:product
D&A 2018 - Technical Program

updated to Sep 15 2018

 

  SUNDAY, September 16, 2018
Su 14:00-17:00 Working Party Business meeting
Su 15:00-18:00 Conference reception desk - Registration of delegates
Su 17:00-19:00 Conference Welcome Reception
Su 19.30-22:30 Student Pub Quiz
  MONDAY, September 17 , 2018
Mo 8.30 - 12.30/ 14.30-17.00 Conference reception desk - Registration of delegates
   
Mo 9:00-9:30 OPENING
  Room: Main; Chairperson: Elisabetta Brunazzi
Mo 9:30-10:15 PLENARY LECTURE
  Room: Main; Chairperson: Eva Sorensen
  Luca Alburno
  Venice Biorefinery Experience: Conversion Project
   
  PARALLEL SESSIONS
Mo 10:20-11:10 Equipment design
  Room: Main; Chairperson: Tony Cai
A NEW TRAY EFFICIENCY MODEL: HOW SIMPLE MAY IT BE?
  Duss M., Taylor R.
   
HYDRAULIC AND MASS TRANSFER PERFORMANCES OF A COMMERCIAL HYBRID PACKING : THE RSP200X - KEY MODELLING PARAMETERS FOR GAS TREATMENT APPLICATIONS
  Alix P., Roesler J., Courtial X., Perdu G., Schultes M.
   
Mo 10:20-11:10 Basic data and fundamental principles
  Room: Adua2; Chairperson: Magdalena Bendova
EXPERIMENTAL INVESTIGATION OF LOCAL FILM THICKNESS AND VELOCITY DISTRIBUTION INSIDE FALLING LIQUID FILMS ON CORRUGATED STRUCTURED PACKINGS
  Gerke S., Leuner H., Repke J.U.
   
DESORPTION OF ISOBUTYL ACETATE INTO AIR AS A LOW-COST ALTERNATIVE SYSTEM FOR THE MEASUREMENT OF LIQUID PHASE MASS TRANSFER COEFFICIENTS
  Lamprecht J.H., Burger A.
   
Mo 11:10-11:40 Coffee Break
   
Mo 11:40-12:30 Equipment design
  Room: Main; Chairperson: Michael Schultes
C2 SPLITTER REVAMP SURPASSES CAPACITY AND EFFICIENCY OF 4-PASS TRAYS
  Summers D., De Villiers W., Green W.
   
POUR POINT DENSITY ESTIMATIONS FOR PACKED COLUMNS WITH STRUCTURED PACKING
  Cai T.
   
Mo 11:40-12:30 Basic data and fundamental principles
  Room: Adua2; Chairperson: Fele Zilnik
HYDRODYNAMICS OF A PACKED COLUMN OPERATED UNDER SUPERCRITICAL CONDITIONS
  Franken H., Knoetze J.H., Schwarz C.
   
SEPARATION OF FURFURAL AND ACETIC ACID WITH LIQUID-LIQUID-EXTRACTION AND DISTILLATION IN BIOREFINERY SYSTEMS: SIMULATIONS AND LABORATORY EXPERIMENTS
  Pokki J.P., Mannisto M., Alopaeus V.
   
Mo 12:30-14:00 Lunch
   
Mo 14:00-14:45 PLENARY LECTURE
  Room: Main; Chairperson: Elisabetta Brunazzi
  Izak Nieuwoudt
  Mass Transfer: Yesterday, Today and Tomorrow
   
  PARALLEL SESSIONS
Mo 14:50-16:05 Energy efficiency and technology
  Room: Main; Chairperson: Megan Jobson
DIVIDING WALL COLUMNS FOR NATURAL GAS LIQUEFACTION PLANTS
  Halvorsen I.J., Dejanovic I., Olujic ˇ., Skogestad S.
   
OPTIMAL OPERATION OF DIVIDING WALL COLUMN USING ENHANCED ACTIVE VAPOR DISTRIBUTOR
  Harvianto G.R., Kim K.H., Kang K.J., Lee M.
   
PROCESS INTENSIFICATION IN MULTICOMPONENT DISTILLATION
  Jiang Z., Madenoor Ramapriya G., Tawarmalani M., Agrawal R.
   
Mo 14:50-16:05 Modelling and simulation
  Room: Adua2; Chairperson: Eugeny Kenig
A RATE-BASED EQUATION-ORIENTED PARALLEL COLUMN MODEL: APPLICATION TO DIVIDING WALL COLUMNS
  Zhou J., Kooijman H., Taylor R.
   
THERMODYNAMIC EQUIVALENCE VALIDATION OF NEW FPDWCS WITH TWO PARTITION WALLS
  Ge X., Liu B., Liu B., Wang H., Yuan X.
   
ON CONTROLLABILITY OF FOUR-PRODUCT DIVIDING WALL COLUMNS
  Lukac G., Halvorsen I.J., Olujic ˇ., Dejanovic I.
   
Mo 16:05-16:30 Coffee Break
   
Mo 16:30-18:10 Energy efficiency and technology
  Room: Main; Chairperson: Rakesh Agrawal
DESIGN AND COMMERCIAL OPERATION OF A DISCRETELY HEAT INTEGRATED DISTILLATION COLUMN
  Wakabayashi T., Ferrari A., Hasebe S.
   
DESIGN OF HEAT-INTEGRATED COLUMNS: INDUSTRIAL PRACTICE
  Rix A., Hecht C., Paul N., Schallenberg J.
   
HEAT INTEGRATED DISTILLATION COLUMN (HIDIC): EXPERIMENTAL STUDY ON A NEW CONCENTRIC COLUMN TECHNOLOGY
  Meyer M., Mizzi B., Rouzineau D., Yala O.
   
OPTIMIZATION OF A COOLING-CONDENSATION TOWER
  Sola Cervera J.L., Daniel A., Hoffmann K.
   
Mo 16:30-18:10 Modelling and simulation
  Room: Adua2; Chairperson: Jens Abildskov
A PAPER ABOUT THE SLOPE OF THE EQUILIBRIUM LINE
  Taylor R., Duss M.
   
PRESSURE-DRIVEN DYNAMIC SIMULATION OF DISTILLATION COLUMNS IN AIR SEPARATION UNITS
  Kender R., Wunderlich B., Thomas I., Peschel A., Rehfeldt S., Klein H.
   
DEVELOPMENT OF A MESOSCALE MODELING APPROACH FOR THE GAS PHASE FLUID DYNAMICS IN STRUCTURED PACKINGS
  Sacher J., Repke J.U.
   
ZERO-GRAVITY DISTILLATION WITH METAL FOAMS: A MODELLING APPROACH
  Rieks S., Preusser N., Gambaryan-Roisman T., Kenig E.
   
Mo 18:15-20:30 Poster session and light refreshment
   
  TUESDAY, September 18 , 2018
   
Tu 8:30-9:15 PLENARY LECTURE
  Room: Main; Chairperson: Jens-Uwe Repke
  Hanna Knuutila
  Stripping the CO2 capture process
   
  PARALLEL SESSIONS
Tu 9:20-10:35 Carbon capture and absorption
  Room: Main; Chairperson: Mohammad Kalbassi
REMOVING CARBON DIOXIDE FROM THE ATMOSPHERE - ASSESSING THE TECHNOLOGIES
  Darton R., Yang A.
   
THE SALTING-OUT EFFECT IN SOME PHYSICAL ABSORBENTS FOR CO2 CAPTURE
  Wanderley R., Evjen S., Pinto D., Knuutila H.
   
IMPROVED AND INNOVATIVE METHODS FOR THE CHARACTERIZATION OF RANDOM AND STRUCTURED PACKINGS
  Grunewald M., Brinkmann J., Hapke M., Van Holt F.
   
Tu 9:20-10:35 Modelling and simulation
  Room: Adua2; Chairperson: Ross Taylor
INDUSTRIAL APPLICATION OF SURROGATE MODELS TO OPTIMIZE CRUDE OIL DISTILLATION UNITS
  Ochoa-Estopier L., Enriquez Gutierrez V.M., Chen L., Fernandez-Ortiz J., Herrero-Soriano L., Jobson M.
   
ENRICHMENT OF COMPONENTS AT VAPOUR - LIQUID INTERFACES: A STUDY BY MOLECULAR SIMULATION AND DENSITY GRADIENT THEORY
  Stephan S., Langenbach K., Hasse H.
   
MARINIZATION OF MASS TRANSFER COLUMNS FOR FLNG APPLICATIONS
  Schultes M., Brauer J., Chen P., Doong S.
   
Tu 10:35-11:00 Coffee Break
   
Tu 11:00-12:40 Carbon capture and absorption
  Room: Main; Chairperson: Hans-Jorg Bart
STRUCTURE-PROPERTY RELATIONSHIPS FOR NEW AMINES FOR REACTIVE CO2 ABSORPTION
  Kessler E., Schafer L.N., Willy B., Schneider R., Irfan M., Rolker J., Von Harbou E., Hasse H.
   
ABSORPTION OF CARBON DIOXIDE USING ENZYME ACTIVATED AMINE SOLUTION IN COLUMNS WITH RANDOM PACKINGS
  Mackowiak J., Syring K., Thomas A., Leimbrink M., Skiborowski M., Gorak A., Mackowiak J.
   
SIMULTANEOUS ABSORPTION OF SO2 AND CO2 FROM CONVENTIONAL AND PARTIAL OXY-FUEL CEMENT PLANT FLUE GASES
  Laribi S., Dubois L., De Weireld G., Thomas D.
   
OPTIMISATION OF THE RECTISOL DESIGN WITH PACKING: THE RECTISOL DEMONSTRATION UNIT
  Masurel E., Wang Z., Szabo R., Corbet S.
   
Tu 11:00-12:40 Control, operation, troubleshooting
  Room: Adua2; Chairperson: Miche Meyer
SOLUTION TO LESTAK’S HEAT TRANSFER PROBLEM FOR DIVIDING WALL COLUMNS AND IMPLICATIONS FOR PRACTICAL OPERATION
  Ehlers C., Schroder M., Fieg G.
   
TROUBLESHOOTING DISTILLATION COLUMNS; UNEXPECTED CAUSES FOR MALFUNCTIONING COLUMNS
  Roza M., Duss M.
   
TROUBLESHOOTING A THERMOSIPHON REBOILER – WHY NEW IS NOT ALWAYS BETTER THAN OLD
  Ouni T., Hansson K.M., Welin S., Hedvall C., Kister H.
   
ANALYSIS OF AN OSCILLATING TWO-STAGE EVAPORATOR SYSTEM THROUGH MODELLING AND SIMULATION: AN INDUSTRIAL CASE STUDY
  Nolin M., Andersson N., Nilsson B., Max-Hansen M., Pajalic O.
   
Tu 12:40-14:00 Lunch
   
Tu 14:00-14:45 PLENARY LECTURE
  Room: Main; Chairperson: Marcus Gruenewald
  Regina Benfer
  Model meets Reality: Distillation Simulation at BASF
   
  PARALLEL SESSIONS
Tu 14:50-16:05 Equipment design
  Room: Main; Chairperson: George De Bruyn
THE MALDISTRIBUTION STORY - AN INDUSTRIAL PERSPECTIVE
  Spiegel L.
   
NEXRING - HIGH PERFORMANCE PACKING FOR DEMANDING APPLICATIONS
  Ausner I., Rauber J., Wehrli M.
   
EXPERIMENTAL INVESTIGATION OF FLUID DYNAMICS IN SANDWICH PACKINGS WITH ULTRAFAST X-RAY TOMOGRAPHY
  Sohr J., Schubert M., Flechsig S., Kenig E., Hampel U.
   
Tu 14:50-16:05 Reactive and hybrid separations
  Room: Adua2; Chairperson: Andrzej Gorak
HYBRID SCHEMES FOR INTENSIFIED CHEMICAL AND BIOCHEMICAL PROCESS ALTERNATIVES
  Garg N., Tula A., Eden M., Kontogeorgis G., Woodley J., Gani R.
   
MEMBRANE-ASSISTED CRYOGENIC DISTILLATION FOR ENERGY-EFFICIENT ARGON PRODUCTION FROM AIR
  Ceylan M., Jobson M., Smith R.
   
DEVELOPMENT OF EXTRACTIVE DISTILLATION PROCESSES FOR CLOSE-BOILING SYSTEMS
  Sprakel L., Kamphuis P., Nikolova A., Schuur B.
   
Tu 16:05-16:30 Coffee Break
   
Tu 16:30-17:45 Equipment design
  Room: Main; Chairperson: Mario Roza
ANALYSIS AND EVALUATION OF PERIODIC SEPARATIONS USING COPS TRAYS
  Nielsen A., Alvarez E.C., Carlsen N., Azizi H., Jorgensen S.B., Abildskov J.
   
DEVELOPMENT AND APPLICATION OF THE TUM-WELCHEM CELL MODELL FOR PREDICTION OF LIQUID DISTRIBUTION IN RANDOM PACKED COLUMNS
  Hanusch F., Engel V., Kender R., Rehfeldt S., Klein H.
   
OPTIMIZING THE DESIGN OF SPLITTER TOWERS
  Nieuwoudt I., Sandford N.
   
Tu 16:30-17:45 Reactive and hybrid separations
  Room: Adua2; Chairperson: Anton Kiss
NOVEL CONTROL STRUCTURES FOR HETEROGENEOUS REACTIVE DISTILLATION
  Moraru M.D., Zaharia E., Bildea S.
   
NEW PROCESS CONTROL CONCEPTS FOR ENERGY EFFICIENT OPERATION OF REACTIVE DIVIDING WALL COLUMNS
  Egger L., Fieg G.
   
DIVIDING WALL COLUMNS IN OPERATION
  Kalita R., Gentry J.
   
Tu 19:30-23:00 Conference dinner
   
  WEDNESDAY, September 19 , 2018
   
We 8:30-9:15 PLENARY LECTURE
  Room: Main; Chairperson: Harry Kooijman
  Andrzej Gorak
  Back to the future: Distillation and absorption in the era of bio, info and process intensification
   
We 9:20-10:35 Carbon capture and absorption
  Room: Main; Chairperson: Mirko Skiborowski
DESIGNING CO2 ABSORPTION COLUMNS WITH ACTIVATED AMINE SOLUTIONS
  Schultes M.
   
REACTION ENTHALPY CONVERSION IN AMINE BASED POST-COMBUSTION CO2 CAPTURE
  Li K., Feron P., Jiang K., Jones T., Bennet R., Hollenkamp A., Pearson P.
   
PILOT TESTS AND RATE-BASED MODELING OF CO2 CAPTURE IN CEMENT PLANTS USING AN AQUEOUS AMMONIA SOLUTION
  Perez-Calvo J.F., Sutter D., Gazzani M., Mazzotti M.
   
We 9:20-10:35 Reactive and hybrid separations
  Room: Adua2; Chairperson: Boelo Schuur
TAKING REACTIVE DISTILLATION TO THE NEXT LEVEL OF PROCESS INTENSIFICATION
  Kiss A., Jobson M.
   
INTEGRATED DESIGN OF SOLVENTS IN HYBRID REACTION-SEPARATION PROCESSES USING COSMO-RS
  Fleitmann L., Scheffczyk J., Schafer P., Jens C., Leonhard K., Bardow A.
   
BASIC PRINCIPLES OF A HYBRID DISTILLATION AND PERVAPORATION UNIT IN A SINGLE COLUMN: AN ANALYTIC TOOL
  Leon J., Fontalvo J.
   
We 10:35-11:00 Coffee break
   
We 11:00-12:15 Emerging separations and technologies
  Room: Main; Chairperson: Zarko Olujic
ANALYSIS AND EVALUATION OF A HEAT INTEGRATED HORIZONTAL DISTILLATION SYSTEM
  Papadakis E., Mansouri S.S., Huusom J.K., Abildskov J.
   
RESULTS OF PROCESS EQUIPMENT IMAGING BY TOMOGRAPHIC GAMMA SCAN
  Haraguchi M.I., Kim K.Y., Calvo W.A.P.
   
EXPERIMENTAL INVESTIGATION AND DESIGN OF ROTATING PACKED BEDS FOR DISTILLATION
  Qammar H., Hecht F., Skiborowski M., Gorak A.
   
We 11:00-12:15 Conceptual design and LCA
  Room: Adua2; Chairperson: Richard Darton
FAST SCREENING OF ENERGY AND COST EFFICIENT INTENSIFIED DISTILLATION PROCESSES
  Skiborowski M.
   
ENHANCED BIOBUTANOL SEPARATION BY HEAT PUMP ASSISTED AZEOTROPIC DIVIDING WALL COLUMNS
  Patrascu I., Bildea S., Kiss A.
   
CONCEPTUAL DESIGN OF A NOVEL PROCESS FOR THE PRODUCTION OF OME FUELS
  Schmitz N., Breitkreuz C., Strofer E., Burger J., Hasse H.
   
We 12:20-13:00 EFCE Excellence Award; Chairperson: Magdalena Bendova
We 13:00-13:30 Closing ceremony and Poster awards
   
We 13:30-14:30 Light lunch and departure
   
   
  LIST of POSTERS
   
- Basic data and fundamental principles
1) EFFICIENCY OF MIXTURE SEPARATION IN DISTILLATION COLUMNS WITH STRUCTURED PACKINGS UNDER CONDITIONS OF DYNAMICALLY CONTROLLED IRRIGATION
  Pavlenko A., Zhukov V., Pecherkin N., Slesareva E., Nazarov A., Li X., Sui H.
   
2) THE EFFECT OF FLUID PROPERTIES AND PACKING SIZE ON THE HYDRODYNAMICS OF PACKED COLUMNS
  Minne U., Burger A., Schwarz C.
   
3) PHASE TRANSITIONS IN HIGHER-MELTING IONIC LIQUIDS: THERMAL STORAGE MATERIALS OR LIQUID CRYSTALS?
  Bendova M., Canji M., Wagner Z., Zdolsek N., Quirion F.
   
4) EXTENDED PERFORMANCE COMPARISON OF DIFFERENT PRESSURE DROP, HOLD-UP AND FLOODING POINT CORRELATIONS FOR PACKED COLUMNS
  Wolf-Zoellner V., Seibert F., Lehner M.
   
5) EVALUATION OF THE KLAE OF STRUCTURED PACKINGS IN SMALL DIAMETER COLUMNS - THE KEY ROLE OF WALL-WIPERS
  Roesler J., Alix P., Royon-Lebeaud A., Valenz L., Haidl J., Rejl F.
   
6) MASS TRANSFER RATE PARAMETERS OF SULZER EX LABORATORY SCALE GAUZE STRUCTURED PACKING
  Roesler J., Muhammad A.
   
7) DIRECT NUMERICAL SIMULATIONS OF LIQUIDS ON MICROSTRUCTURED SURFACES: ANALYZING THE FLUID DYNAMICS ON PACKING
  Bonart H., Repke J.U.
   
8) NOVEL MODEL FOR SEPARATION EFFICIENCY OF PACKED DISTILLATION COLUMNS
  Rejl F., Valenz L., Haidl J., Moucha T., Cmelikova T., Petricek R.
   
9) UNIVOLATILITY CURVES IN TERNARY MIXTURES: TOPOLOGY AND BIFURCATION
  Shcherbakova N., Rodriguez Donis I., Abildskov J., Gerbaud V.
   
10) CONTINUOUS ESTIMATION OF THE KEY COMPONENTS CONTENT IN THE ISOMERIZATION PROCESS PRODUCTS
  Herceg S., Zeljka Ujevic A., Bolf N.
   
11) HYDROGEN AND CARBON DIOXIDE SOLUBILITY IN CELLULOSE, HEMICELLULOSE AND LIGNIN MODEL COMPOUNDS AND SOLUTIONS AT DIFFERENT TEMPERATURE AND PRESSURE CONDITIONS
  Fele Zilnik L., Likozar B.
   
- 12) DESIGN OF HIGHLY-SPECIFIC AND CHEAP ABSORPTION MATERIALS FOR PHARMACEUTICAL PURIFICATION PROCESSES USING SUSTAINABLE TECHNOLOGIES
  Viveiros R., Heggie W., Casimiro T.
   
- Carbon capture and absorption
13) OPTIMAL OPERATION OF A CO2 ABSORPTION PLANT IN A POST-COMBUSTION UNIT FOR COST REDUCTION
  Moioli S., Pellegrini L.
   
14) AMINO ACID BASED SOLVENT VS. TRADITIONAL AMINE SOLVENT: A COMPARISON
  Moioli S., Lodi G., Pellegrini L., Ho M., Wiley D.
   
15) BENCH-SCALE STUDY FOR CO2 CAPTURE USING AMP/PZ/WATER MIXTURES
  Patil M., Vaidya P., Kenig E.
   
16) RATE-BASED MODELING OF CO2 ABSORPTION WITH SANDWICH PACKINGS
  Flechsig S., Sohr J., Schubert M., Hampel U., Kenig E.
   
17) MODEL ADAPTATION AND OPTIMIZATION FOR THE EVALUATION AND INVESTIGATION OF NOVEL AMINE BLENDS IN A PILOT-PLANT SCALE CO2 CAPTURE PROCESS UNDER INDUSTRIAL CONDITIONS
  Wilhelm R., Esche E., Guetta Z., Menzel J., Thielert H., Repke J.U.
   
18) COMPREHENSIVE STUDY OF HYDRAULIC AND MASS-TRANSFER CHARACTERISTICS DETERMINATION UNDER ABSORPTION CONDITIONS PERFORMED ON STRUCTURED PACKINGS RASCHIG SUPER-PAK
  Valenz L., Rejl F., Haidl J., Moucha T., Cmelikova T., Petricek R.
   
19) STUDY ON THE SELECTIVE ABSORPTION OF HYDROGEN SULFIDE FROM COAL GAS WITH HIGH GRAVITY TECHNOLOGY
  Guo Q., Qi G., Liu Y.
   
20) ABSORPTION AND DESORPTION STUDY OF ALKYL AMINE PROMOTED DEEA SOLVENTS FOR CO2 CAPTURE
  Bernhardsen I.M., Perinu C., Jens K.J., Pinto D., Knuutila H.
   
- Conceptual process design and Life Cycle Analysis
21) BIOBUTANOL PURIFICATION BY LIQUID-LIQUID EXTRACTION ASSISTED DIVIDED WALL COLUMNS
  Sanchez-Ramirez E., Quiroz-Ramirez J.J., Segovia-Hernandez J.G., Errico M.
   
22) CAMD FOR ENTRAINER SCREENING OF EXTRACTIVE DISTILLATION PROCESS BASED ON NEW THERMODYNAMIC CRITERIA
  Cignitti S., Rodriguez Donis I., Abildskov J., You X., Shcherbakova N., Gerbaud V.
   
23) DIVIDED WALL COLUMNS: USEFULNESS AND CHALLENGES
  Lorenz H.M., Staak D., Grutzner T., Repke J.U.
   
24) EFFECT OF ORGANIC SOLVENTS IN SEPARATION SECTION OF LEVULINIC ACID PRODUCTION: SYNTHESIS OF DISTILLATION SEQUENCES
  Tuppurainen V., Ahola J., Tanskanen J.
   
25) A GENERALIZED EASE OF SEPARATION INDEX FOR SELECTION OF OPTIMAL CONFIGURATION OF TERNARY DISTILLATION
  Wang L., Tian F., Luo Y., Yuan X., Yu G.
   
- Modelling and simulation
26) THE DEPENDENCE OF THE FEASIBLE SEPARATION REGION ON FEED QUALITY AND COLUMN EQUIPMENT
  Krolikowski L.
   
27) INSIGHTS FOR DESIGNING THE HYDROCARBON RECOVERY FROM IONIC LIQUIDS BY DISTILLATION IN THE ALIPHATIC/AROMATIC SEPARATION BY LIQUID-LIQUID EXTRACTION
  Navarro P., Larriba M., Delgado-Mellado N., Ayuso M., Garcia J., Rodriguez F.
   
28) SUSTAINABLE PRODUCTION OF RENEWABLE AVIATION FUEL THROUGH INTENSIFICATION STRATEGIES
  Gutierrez-Antonio C., Gomez-Castro F.I., Hernandez S.
   
29) THERMODYNAMIC MODEL TO STUDY REMOVAL OF CHLORINE, SILICON TETRAFLUORIDE AND OTHER UNCOMMON MATERIALS FROM OFF GASES
  Ganesh S., Goebel H., Mathias P.M.
   
30) A NOVEL RTD COMPARTMENT MODEL FOR TRAY EFFICIENCY PREDICTIONS
  Vishwakarma V., Schubert M., Hampel U.
   
31) NUMERICAL SIMULATION OF TWO-PHASE FLOW AND INTERFACIAL SPECIES TRANSFER IN STRUCTURED PACKINGS
  Hill S., Acher T., Hoffmann R., Ferstl J., Deising D., Marschall H., Rehfeldt S., Klein H.
   
32) SIMULATION AND DESIGN OF A DIVIDING WALL COLUMN WITH AN ANALYSIS OF A VAPOUR SPLITTER DEVICE
  Bernad-Serra A., Jakobsson K., Alopaeus V.
   
33) A NOVEL APPROACH TO THE MODELLING OF TRANSPORT PHENOMENA IN RANDOM PACKINGS
  Salten A., Mackowiak J., Mackowiak J., Kenig E.
   
34) MULTIPLE STEADY-STATE SOLUTIONS IN A DIVIDING WALL COLUMN SIMULATION
  Zhou J., Kooijman H., Taylor R.
   
35) TEMPERATURE DIFFERENCE CONTROL OF A FOUR-PRODUCT DIVIDING-WALL DISTILLATION COLUMN
  Qian X., Huang K., Jia S., Chen H., Yuan Y.
   
36) CHOOSING THE RIGHT MODEL FOR DISTILLATION PROCESSES IN PACKED COLUMNS: THEORY AND EXPERIMENTS
  Waltermann T., Benfer R., Schlueter S., Reinhardt A., Knoesche C., Gorak A., Skiborowski M.
   
37) A NOVEL ROBUST AND FAST ALGORITHM FOR EQUATION-ORIENTED FLOWSHEET SIMULATION AND OPTIMIZATION USING PSEUDO-TRANSIENT MODELS
  Ma X., Luo Y., Ma Y., Yuan X.
   
38) COMPARISON OF EXTRACTION SOLVENTS IN THE RECOVERY OF LEVULINIC ACID FROM BIOMASS HYDROLYSATE USING A GROUP CONTRIBUTION METHOD
  Leal Silva J.F., Maciel Filho R., Wolf Maciel M.R.
   
39) OPTIMIZATION OF HIGH TEMPERATURE REACTIVE DISTILLATION FOR PRODUCTION OF ETHYL LEVULINATE
  Leal Silva J.F., Wolf Maciel M.R., Maciel Filho R.
   
40) A NEW OPTIMISATION-BASED DESIGN METHODOLOGY FOR ENERGY-EFFICIENT CRUDE OIL DISTILLATION SYSTEMS WITH PRE-FLASH UNITS
  Ledezma-Martinez M., Jobson M., Smith R.
   
41) EXPERIMENTAL AND THEORETICAL STUDIES ON LOCAL LIQUID PHASE DISTRIBUTION IN PACKED COLUMNS
  Van Holt F., Brinkmann J., Grunewald M.
   
42) MODELING OF THE USE OF HYDROCARBONS IN ABSORPTION REFRIGERATION MACHINE
  Djezzar S., Meniai A.H.
   
43) CONTROLLABILITY FEATURES OF DIVIDING-WALL COLUMNS
  Tarjani A.J., Toth A., Nagy T., Haaz E., Fozer D., Andre A., Mizsey P.
   
44) STUDY OF CLEAR LIQUID HEIGHT AND DRY PRESSURE DROP MODELS FOR VALVE TRAY
  Wang C., Mccarley K., Cai T., Vennavelli A.
   
45) DESIGN AND CONTROL OF AN ACN-BASED BUTADIENE PRODUCTION PROCESS BY USING DIVIDING WALL COLUMNS
  Chen J., Cui C., Liu S., Xi Z., Sun J.
   
46) INVESTIGATION OF GLOBAL SENSITIVITY ANALYSIS ON OPERATING REVENUE AND CO2 EMISSIONS FROM CRUDE OIL DISTILLATION USING TWO-STAGE UNCERTAINTY QUANTIFICATION METHOD
  Le M., Pham D., Lee M.
   
47) PROJECT-BASED LEARNING APPLIED TO DISTILLATION AND ABSORPTION EDUCATION: INTEGRATION BETWEEN INDUSTRY AND A CHEMICAL ENGINEERING UNDERGRADUATE COURSE
  Fregolente L., Venturelli H., Rodrigues J., Da Silva E., Diniz I., Wolf Maciel M.R.
   
48) DEHYDRATION OF ISOPROPANOL BY BATCH HETEROAZEOTROPIC DISTILLATION WITH TOLUENE AS ENTRAINER
  Nemeth B., Hegely L., Lang P.
   
49) DIFFERENT FEEDING POLICIES FOR SEMI-BATCH DISTILLATION
  Lang P., Hegely L.
   
50) A NOVEL PROCESS DESIGN FOR BIOBUTANOL PURIFICATION FROM ABE FERMENTATION
  Kaymak D.
   
51) EXTENDING MURPHREE TRAY EFFICIENCY FROM MASS TO HEAT TRANSFER IN DISTILLATION
  Bausa J., Steimel J.
   
52) MODELLING OF ENZYMATIC REACTIVE CO2 ABSORPTION
  Russo M.E., Bareschino P., Pepe F., Marzocchella A., Salatino P.
   
- Control, operation, troubleshooting and manufacturing excellence
53) A RIGOROUS MODEL FOR EVALUATING MOVING WINDOW SOFT SENSORS FOR INDUSTRIAL DISTILLATION PROCESSES
  Torgashov A., Skogestad S., An D.
   
54) CRUDE VACUUM TOWER WASH BED OPTIMIZATION
  Vidrine S., Pless L., Cantley G.
   
55) TROUBLESHOOTING AND CUSTOMIZED ENGINNERING AT THE LIMIT
  Geipel C., Schrufer M., Franz U., Rodel M., Pechtold B.
   
56) PACKED BED PERFORMANCE ANALYTICS BASED ON GAMMA SCANS
  Vidrine S., Cipolla G., Pless L.
   
57) IMPROVING THE PERFORMANCE OF TOWERS WITH RANDOM PACKING
  Nieuwoudt I., Quotson P., Juarez J., Yeh N.
   
- Reactive and hybrid separations
58) SEPARATION OF MIXTURE CONTAINING MAXIMUM BOILING AZEOTROPE WITH EXTRACTIVE HETEROGENEOUS-AZEOTROPIC DISTILLATION
  Toth A., Szilagyi B., Haaz E., Solti S., Nagy T., Tarjani A.J., Valentinyi N., Mizsey P.
   
59) NOVEL DUAL-EFFECT SIDE REACTIVE DISTILLATION FOR IMPROVING ENERGY EFFICIENCY OF METHYL ACETATE HYDROLYSIS PROCESS
  Nguyen L., Lee M.
   
60) ENERGY MINIMUM DESIGN AND SYSTEMATIC ANALYSIS OF THE REACTIVE DIVIDING WALL COLUMN
  Harding L.S., Fieg G.
   
61) CONCEPTUAL DESIGN AND PRACTICAL CHALLENGES OF GAS-PHASE CATALYTIC REACTIVE DISTILLATION / ABSORPTION
  Yan P., Li X., Li H., Gao X.
   
62) A NOVEL METHOD FOR DETERMINING THE OPTIMAL OPERATING POINTS OF REACTIVE DISTILLATION PROCESSES
  Muthia R., van der Ham A., Kiss A.
   
63) EFFECT OF OPERATING CONDITIONS AND SPLIT RATIO FOR LACTIC ACID PURIFICATION BY SHORT PATH EVAPORATION SYSTEM
  Komesu A., Oliveira J., Martins L., Maciel Filho R., Wolf Maciel M.R.
   
64) INVESTIGATION OF PROCESS ALTERNATIVES FOR THE SEPARATION OF ETHANOL, N-BUTANOL AND WATER TERNARY MIXTURE
  Valentinyi N., Marton G., Toth A., Haaz E., Andre A., Mizsey P.
   
65) SIMULATION STUDY OF A REACTIVE DISTILLATION PROCESS FOR THE ETHANOL PRODUCTION
  Cįrdenas-Guerra J.C., Figueroa-Gerstenmaier S., Reyes-Aguilera J.A., Hernandez S.
   
66) SELECTIVITY ENGINEERING WITH HYBRID REACTIVE DISTILLATION COLUMN: MIXTURES CONTAINING INERTS AND MULTI-AZEOTROPES
  Singh D., Dutta A., Gaur A., Hasan S.
   
67) FEASIBILITY STUDY OF REACTIVE DISTILLATION CONFIGURATION FOR 2-METHOXY-2-METHYLHEPTANE
  Hussain A., Lee M.
   
68) PRODUCTION OF A GREEN MULTI-PURPOSE FUEL BY REACTIVE DISTILLATION
  Brunazzi E., Malandrino A., Patrini R.
   
69) HYBRID SEPARATION SCHEME FOR AZEOTROPIC MIXTURES –SUSTAINABLE DESIGN METHODOLOGY
  Vooradi R., Patnaikuni V.S., Tula A., Anne S.B., Eden M., Gani R.
   
- Emerging separations and technologies
70) ANALYZING THE OPERATING LIMITS IN HIGH GRAVITY EQUIPMENT
  Gross K., Neumann K., Skiborowski M., Gorak A.
   
71) GAS DRYING USING SUPPORTED IONIC LIQUIDS
  Radakovitsch F., Heym F., Jess A.
   
72) INVESTIGATION OF THE SEPARATION PERFORMANCE OF A STRIPPING MICROCHANNEL DEVICE: A MODEL-BASED APPROACH
  Adiche C.
   
73) INDIRECT SERIES OF FALLING FILM DISTILLATION COLUMN TO PROCESS SYNTHETIC NAPHTHA
  Querino M.V., Marangoni C., Machado R.
   
74) CHEMI-ELECTRO-HYDRODYNAMIC OF SULPHUR DIOXIDE ABSORPTION BY ELECTRIFIED WATER SPRAYS
  Di Natale F., Carotenuto C., Manna L., Lancia A.
   
- Equipment design
75) IN-LINE ANALYSIS OF ENTRAINMENT THROUGH IMAGE BASED PROBE MEASUREMENT TECHNOLOGY
  Schulz J., Bart H.J.
   
76) A NOVEL POTENTIAL APPLICATION OF SIC CERAMIC FOAM MATERIAL TO DISTILLATION: STRUCTURED CORRUGATION FOAM PACKING
  Li H., Meng Y., Zeng J., Li X., Gao X.
   
77) EXPERIMENTAL EVIDENCE ON PERFORMANCE OF AN ADVANCED GAUZE STRUCTURED PACKING UNDER DEEP VACUUM DISTILLATION CONDITIONS
  Schulz R., Rietfort T., Helmut J., Olujic ˇ.
   
78) DESIGN OF A TEST RIG FOR THE SIMULATION OF STARTUP PROCEDURES IN MAIN HEAT EXCHANGERS OF AIR SEPARATION PLANTS
  Haider P., Freko P., Lochner S., Reiter T., Rehfeldt S., Klein H.
   
79) AN UNOBSTRUCTED VIEW OF LIQUID FLOW IN STRUCTURED PACKING
  Wehrli M., Kogl T., Linder T., Arlt W.
   
80) AN ADVANCED APPROACH TO DESIGN STRUCTURED PACKING COLUMNS USING MINIATURIZED EXPERIMENTAL SET-UPS
  Leuner H., Hapke M., Sacher J., Grunewald M., Repke J.U.
   
81) FLEXIBILITY FOR ABSORPTION AND DISTILLATION COLUMNS
  Riese J., Grunewald M.
   
82) RANDOM PACKING MODELING UNDER HIGH PRESSURE FOR GAS-LIQUID SYSTEMS
  Mackowiak J.
   
83) SEAWATER DESULPHURIZATION OF SIMULATED FLUE GAS IN SPRAY AND PACKED COLUMNS: AN EXPERIMENTAL AND MODELLING COMPARISON
  Flagiello D., Di Natale F., Carotenuto C., Erto A., Lancia A.
   
84) LIMITATIONS OF AIR/WATER TESTING IN THE DEVELOPMENT OF HIGH PERFORMANCE TRAYS
  Glueer S., Gabler A., Ang C.P.
   
85) THE GX FIBER BED - A NOVEL MIST ELIMINATOR WITH IMPROVED AEROSOL REMOVAL PERFORMANCES
  Del Ministro C., Bosio F., Spreafico S., Brunazzi E.
   
86) SIMULATION OF AN SO2 TOLERANT AMINE BASED POST COMBUSTION CO2 CAPTURE PROCESS
  Cousins A., Puxty G., Pearson P., Weiland R., Garg B., Li K., Verheyen V., Feron P.
   
87) CYCLIC DISTILLATION TECHNOLOGY - A NEW CHALLENGER IN FLUID SEPARATIONS
  Kiss A., Maleta V.
   
- Energy efficiency and technology
88) ENERGY SAVING SCHEMES FOR SEPARATION OF BENZENE-CYCLOHEXANE-TOLUENE MIXTURE WITH DIFFERENT INITIAL COMPOSITIONS BY EXTRACTIVE DISTILLATION
  Anokhina E., Berdibekova S., Timoshenko A.
   
89) BENZENE PURIFICATION FROM THIOPHENE BY EXTRACTIVE DISTILLATION WITH DIMETHYLFORMAMIDE
  Timoshenko A., Anokhina E., Akishin A., Remizova A.
   
90) NEW CONCEPTUAL DESIGN METHODOLOGY FOR A CONCENTRIC HEAT INTEGRATED DISTILLATION COLUMN (HIDIC)
  Detcheberry Marin M., Meyer M., Mizzi B., Rouzineau D.
   
91) DESIGN OF A FULLY HEAT-INTEGRATED PRESSURE-SWING DISTILLATION FOR CLOSE-BOILING SEPARATION
  Xi Z., Cui C., Chen J., Liu S., Sun J.
   
92) NETWORK OF DIVIDING WALL COLUMNS IN COMPLEX PROCESS UNITS
  Kalita R., Kanda A., Gentry J.
   
93) HIDIC CONFIGURATION SELECTION BASED ON EXERGETIC ANALYSIS
  Mancera J., Mendoza D., Riascos C.
   
94) USE OF DIVIDING WALL COLUMNS FOR PROCESS INTENSIFICATION
  Kalita R., Kockler D., Ignat R.